Lego GBC Instructions

Lego GBC Instructions is a list of the instructions source links (in no particular order)  for Lego Great Ball Contraption modules and equipment.

Have a look at GBC Modules for modules without instructions.

Disclosure: This post contains affiliate links that earn me a small commission, at no additional cost to you. I only link products I personally use and think my readers will find useful. Affiliate links will be clearly marked with the text (Paid Link Disclaimer) next to them.

Ready to Build

Instructions in this area can either be made using existing Lego sets or be bought as a kit.

Name:
Compact Carden Lift.
(BrickFair 2019 Workshop Module)

Designer:
Lawrie George.

Name:
Lego GBC Ramps (Brickworld 2017 workshop module)

Designer:
Bryan Bonahoom.

Instructions:
http://www.greatballcontraption.com/wiki/GBCRamps.

Set can be purchased by Brickworld Attendees:
https://brickworld.com/convention/

Name:
GBC 31 Flex Conveyor – 42094 Building Instructions

Designer:
PV-Productions.

Name:
GBC 34 Tilt Lift Workshop Module – 42075 Building Instructions

Designer:
PV-Productions.

GBC 34 Tilt Lift Workshop Module requires modifications to meet GBC standard
– Lower the input of the module 3 studs
– Lower the output of the module 2 studs
– Change the ramp hinge to ensure a regulated flow of balls

Modules I’ve built.

Instructions in this are for GBC Modules that I have built and displayed at events.

Designer:
Lawrie George.

Name:
Lego GBC Wheel Lift 12×12.

Designer:
Brian Alano.

Name:
Lego GBC Serpentine.

Designer:
Brian Alano.

Name:
Lego GBC Serpentine V2.1

Original Designer:
Brian Alano.

Revised By:
Lawrie George.

Revised Instructions:
Lego GBC Serpentine V2 Instructions.

Name:
Lego GBC Sawtooth.
(Brickworld 2019 workshop module)

Designer:
John Brost.

Name:
Lego GBC Power Miners.

Designer:
Ryk Field.

Name:
Lego GBC Workshop Module 01.

Designer:
Matt Norman.

Name:
Lego GBC Skaerbaek 2017.

Designer:
Maico Arts.

Name:
XL Motor unit for Skaerbaek 2017.

Designer:
Maico Arts.

Name:
Driving unit for Skaerbaek 2017.

Designer:
Maico Arts.

Designer:
Tom Atkinson.

Revised By:
Lawrie George.

Revised Instructions:
Coming Soon.

Designer:
Lawrie George.

Instructions:
Ball Bin Instructions

Other Instructions

Modules I haven’t built, but have been featured in GBC Layouts that I have been a part of (once again in no particular order).

Name:
GBC stepper module

Designer:
Lasse Deleuran.

Name:
Rampe Oscillante.

Designer:
Tofe59.

Instructions:
planet-gbc.com/?p=2717